Feel free to bend it: Our 2835 2 pin led connectors with 17 strand tin-plated oxygen-free copper inside each circuit, the wires are thicker than most of the other RGB led strip jumper in the market, and features stronger physical features. These led light strip connectors are flexible and durable enough for bending or twisting in any angles without breaking.
Easy to use: Just clasp your prepared led strip section into the led 4 pin connectors to get connected. Make sure the strip is properly aligned with the connector(match the positive terminals).
Application: For any 4 pins 10mm wide 5050 3528 RGB LED light strip. Suitable for both waterproof and non-waterproof light strips (Please peel off silicon on the surface around the soldering line area before installing waterproof strips ).
● Make sure your section of the LED light strip has four contacts (+, B, R, and G) and the contacts are all clean and dry
● Open the white clasp of the connector
● Insert the LED light strip into the clasp, under the prongs – making sure to match the “+ “side of the strip to the “+” side of the clasp
● Close the clasp
● Gently pull on the LED light strip to confirm you’ve made a solid connection